are easy to use, fast acting odor eliminator that uses chlorine dioxide gas
as an oxidizer to eliminate odors caused by fungus, spores,
tobacco and fire smoke odors, garbage odors,
skunk spray, and many other organic odors that are subject to oxidation at their source. Occasional
reapplication on reoccurring
odors will extend its ability to neutralize and oxidize the odor sources indefinitely.
OdorXit AQM 30 Day packets are available in 10 and 25 gram reactor packets. Both can be accelerated to be 1 Day
packets by standing the packet up in 1/8 to 1/4 inch of water. Used in 30 Day mode the packets slowly release chlorine dioxide gas for up to 30 days depending on the relative humidity (the higher the faster they produce chlorine dioxide). In
1 Day mode, the packets will release the same amount of chlorine dioxide gas but in just 24 hours. More information on using fast vs. slow mode.
The 10 gram packet is appropriate for up to 1000 sq ft of surface area to be
treated, 25 grams is good for up to 2000 sq ft. of surface area.
OdorXit's CLO2 products use the contact chemistry process
of chlorine dioxide to oxidize and neutralize a wide variety of organic
substances that cause odors. Because
OdorXit's CLO2 products oxidizes and neutralizes the
source of the odors, the odor never return unless the treated area is re-contaminated.